Pelco Manual C690M-E (11/04) 53
7. Use the pull-down menu in the Data Encoding row to select one of the following:
Selection Meaning
ASYNC Asynchronous data encoding
SNA/SDLC (NRZ) SNA/SDLC data encoding, NRZ bit format
SNA/SDLC (NRZI) SNA/SDLC data encoding, NRZI bit format
8. Use the pull-down menu in the BAUD Rate row to select a transfer rate.
9. Use the pull-down menu in the Data Bits row to select either 8-bit or 7-bit data. Note that
only a DX2000 Data Hub (DX2000DH) can receive 7-bit data with the parity set to None.
10. Use the pull-down menu in the Parity row to select parity (NONE, ODD, or EVEN). Note
that only a DX2000 Data Hub (DX2000DH) can receive 7-bit data with the parity set to
None.
11. Stop Bits are always automatically detected.
12. The Printer row is only visible for ATM device types. Use the pull-down menu in the
Printer row to select one of the following:
Selection Meaning
Receipt Accept receipt printer data only.
Journal Accept journal printer data only.
Both Accept both receipt and journal printer data.
