Chapter 3: S-PCON-U (Power Connector)
22
Intelli-M Hardware Installation And Reference Guide
S-PCON-U Overview
The Intelli-M Power Connector Module (S-PCON-U) is a dual input, single output power supply
and communications module for the Intelli-M ethernet IDC (S-EIDC-U). It provides a method for
supplying power and ethernet communication into the S-EIDC-U over a standard ethernet cable.
Power is connected into the S-PCON-U via a PoE (Power over Ethernet) enabled switch
connected to the input RJ45 ethernet connector, and/or by an external 24 VDC power supply
connected to the DC input connector.
Note: PoE has not been UL verified.
Intelli-M S-PCON-U
Technical Features
The Intelli-M S-PCON-U has the following technical features:
• Supports one S-EIDC-U
• One ethernet “In” port with capability of accepting PoE power at 48 VDC (350 mA)
• One ethernet “Out” port with capability of passing through PoE power at 48 VDC (350 mA)
• One connector capable of accepting 24 VDC from an external power supply
• LED voltage indicator
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
22.9-24VDC@1A
@
@
