A SERVICE OF

logo

Open as PDF
next previous
Care and Maintenance 5-7
Clearing Supply Jams
To clear a supply jam:
1. Turn off the printer.
2. Open the supply cover completely.
3. Open the label deflector by gently pressing down on it with two
fingers.
4. Remove the supplies. See “Removing Supplies” in Chapter 3.
5. Carefully remove any jammed supply and close the deflector.
NOTE: Do Not pull the jammed supply out through the front of the label
deflector. Do Not use sharp objects to remove jammed supplies.
6. Carefully remove any jammed supply between the pinch and feed
rollers.
7. Reload the supplies and close the label deflector.
Pinch Roller
(Feed Roller is
behind it
)