➢
Check primary filter frequently and
clean when dirty.
➢
To remove primary filter, remove the
dust bin and dust bin lid assembly as
outlined in the DUST BIN CLEANING
section.
➢
While holding primary filter over a
trash container grasp filter, rotate
and lift off.
➢
Clean primary filter by gently tapping
over a trash container.Tap on several
sides to ensure best cleaning.
➢
Rinse with water only as needed, do
not use any detergent or soap.
➢
Allow the filter to dry for 24 hours
before putting it back into the
vacuum cleaner.
➢
When cleaning the filter no longer
restores vacuum suction to full
power you need to replace the filter.
TO REPLACE PRIMARY FILTER
➢
With slot side on filter towards the
filter cover slide cleaning cam inside
opening, rotate filter clockwise until
slots lock onto tabs in cover.
Note: Under normal use and care, your
filter can be expected to last up to 5
years.
➢
Re-assemble dust bin lid to dust bin.
Insert into vacuum cleaner and
secure with dust bin latch.
