Confi
urin
the Printe
3.7.1
DATA BACKUP MODE
The Data Backup Mode is using the buffer of the printer. All receiving data from the host
are saved first. To get data printed select after saving the data the function Printing Saved
Data (see paragraph
3.7.2
).
Note:
The new to be saved data will overwrite the saved data before.
[STOP
#
] to selec
You hea
a shor
beep.
HEX PRINTING
WAITING FOR DATA ...
The receiving data from the host will be stored in the buffer of the printer. HEX PRINTING
OPERATE NATURALLY
[STOP
#
] to stop hex printing HEX PRINTING
OPERATE NATURALL
If
ou
an
to leave the off-line mode press [ST
TION 2] and
[COMPRESS
–
] together.
SAVE PARAMETERS
ACCEPT ST2 = IGNORE
*
The dis
la
ed line is de
endin
on the selected emulation.
3.7.2
PRINTING SAVED DATA
All before in the buffer of the printer saved data can be printed in HEX format with this
function.
N
te:
The saved data are printed
with two bytes first
(in the sample in bold), which
indicates the len
th of the saved data.
Sam
le:
00000 00 0C 07 0D 07 0D 07 0D 07 0D 07 0D 0 &
C
*
C
*
C
*
C
*
C
*
[COMPRESS
–
]
until the LCD sho
s:
HEX PRINTING
PRINTING SAVED DATA
[STOP
#
] to accep
The
reen Station 2 lamp is flashin
.
HEX PRINTING
INSE
T A4 SHEET
The printer starts printing vertical lines after inserting a paper. HEX PRINTING
PRINTING, WAITING...
After printing and eject the page the LCD shows: HEX PRINTING
POWER OFF OR OTHERS
3-25
Ke
o
action Two line display
Select Debug / Test DEBUG/TEST
HEX PRINTING
[COMPRESS
–
]
HEX PRINTING
DATA BACK UP MODE
Press [STATION 2] to ignore.
Ke
o
action Two line display
Select Debug / Test DEBUG/TEST
HEX PRINTING
CX LQ1600K
ON-LINE
