Confi
urin
the Printe
3.6.8
RESUME HARDWARE PARAMETERS
All standard default settings of the firmware will be restored. The contents of the page
counter will not be chan
ed, but all other settin
s are reset.
[COMPRESS
–
]
until the LCD sho
s:
DJUSTMENT
RESUME HW PARAMETERS
[STOP
#
] to selec
The
ello
Read
and
reen Station 1 and Station 2 lamp li
hts up.
RESUME HW PARAMETERS
ACCEPT ST2 = IGNORE
If
ou
an
to leave the off-line mode press [ST
TION 2] and
[COMPRESS
–
] together.
SAVE PARAMETERS
ACCEPT ST2 = IGNORE
*
The dis
la
ed line is de
endin
on the selected emulation.
3.7
DEBUG / TEST
The Debug / Test parameter defines the execution of control sequences when Hex-
printing has been activated. The incoming or stored data from the host are printed in hex
mode. This is an excellent hel
for the
ro
rammer.
The Debug/ Test mode is arrange into two groups:
•
Hex Printing
•
Ma
netic Test
In the Hex Printing mode we will find five groups:
•
Data Backup Mode
•
Printing Saved Data
•
Printing Last Data
•
Printing Flash Data
•
Directly Dump
The HE
print is divided into three groups:
•
1. the transmission code first with five bytes
•
2. values of the data in HEX
•
3. ASCII code of the
rinted data
1.
2.
3.
Sam
le:
00000 00 0C 07 0D 07 0D 07 0D 07 0D 07 0D 0 &
C
*
C
*
C
*
C
*
C
*
3-24
Ke
o
action Two line display
Select Adjustment ADJUSTMENT
PHOTOSENSOR VALUE
Press [STATION 2] to ignore.
Press[STOP
] to accept
or [ST
TION 2] to ignore.
DJUSTMENT
RESUME HW PARAMETERS
OFF-LINE MODE
DJUSTMENT
CX LQ1600K
ON-LINE
