TD530XA/601XB 01-36 02.8.26 11:44 AM Page ii
46. ANT. in jack
Connect to an antenna, cable system, or satellite
system.
4% Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect
to a standard AC outlet.
48. COAXIAL digital audio out jack
Connect to the digital input of an external
amplifier or decoder.
49. AUDIO I.JR output jack
Connect to the analog audio input of an external
amplifier or decoder.
PREPARATI©N FOR USE
Satellite Box or
Cable Box (Not supplied)
From Cable System or
Satellite Dish
½
VHF/UHF Antenna
_ (Not supplied)
"VHF Antenna (Not supplied)
75-ohm [] lllllllllllllllgllill
Fromeable Coaxial II/I L
System Cable till
(Not sup- _m/_ m
plied)
Cab,etNet°1
suppled' 4
or
VHF/UHF
Combiner
(Not supplied)
or
UHF Antenna
(Not supplied)
J [Fig. 41
Flat twin-lead cable
_ H_/L' H_ ,5Lt ARA f _: AA ?AA'A'AS
In some areas it will be necessary to use an outdoor
antenna.
LS( RA,'_f) Lf:N Y(Z_
Use this connection if your cable system connects
directly to your TV/DVD/VHS without a converter
box.
By using this connection you can:
1) Use the TV/DVD/VHS remote to select channels.
2) Program one or more unscrambled channels f'or
Automatic Timer Recording.
NOTE: This unit will ONLY record and view the
same channel.
(,4BLI: _I_H (.O:%! AA'TA/¢/
f AS(JCA,,_IffLf:_' f_O,_ OA' SA'LT_LLI'H_
f ox
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown in the ilustratiom
By using this connection you can also record scram-
bled channels. However, channel selection must be
made with the converter box or satellite box. This
means that channels cannot be changed using the
TV/DVD/VHS Remote Control. Unattended timer
recording is limited to one channel at a time.
Antenna/Cable Connections
Continued on the Next Page.
- 11 - EN
IC29
