Rotary Lawnmower Owners Manual
Safety
Operation
Assembly
Maintenance
Model No. M46
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit.
Failure to follow instructions can result in serious personal injury. Spend a few moments to
familiarize yourself with your mower before each use.
9096-305209
Model No. M46
AU
10
RUNNING THE ENGINE
ENGINE CONTROL
This is mounted at the top left side of the handle (most models). It operates the choke, for
starting, and allows you to set the governed speed of the engine while cutting or to stop the
engine.
You will not need to change the control setting
constantly while mowing because the governor
holds the selected speed, even under varying
cutting loads. The positions for CHOKE, FAST,
SLOW and STOP are marked.
AU
ENGINE CONTROL
This is mounted at the top left side of the handle (most models). It operates the choke, for
starting, and allows you to set the governed speed of the engine while cutting or to stop the
engine.
You will not need to change the control setting constantly
while mowing because the
governor holds the selected speed, even under varying
cutting loads. The positions for
CHOKE, FAST, SLOW and STOP are marked.
Fig. 4
Fig. 5
AU
10
RUNNING THE ENGINE
AU
ENGINE CONTROL
This is mounted at the top left side of the handle (most models). It operates the choke, for
starting, and allows you to set the governed speed of the engine while cutting or to stop the
engine.
You will not need to change the control setting constantly while mowing because the
governor holds the selected speed, even under varying cutting loads. The positions for
CHOKE, FAST, SLOW and STOP are marked.
Fig. 4
Fig. 5
AU
10
RUNNING THE ENGINE
AU
ENGINE CONTROL
This is mounted at the top left side of the handle (most models). It operates the choke, for
starting, and allows you to set the governed speed of the engine while cutting or to stop the
engine.
You will not need to change the control setting constantly while mowing because the
governor holds the selected speed, even under varying cutting loads. The positions for
CHOKE, FAST, SLOW and STOP are marked.
Fig. 4
Fig. 5
