Revision History 25
E-EQ-MX6DKRG-D-ARC MX6 Cradle Reference Guide
PowerScan LR Scanner, 8ft D9 Interface Cable 8310A326SCNRPWRLR8DA9F
PowerScan LR Scanner, 12ft D9 Interface Cable 8310A327SCNRPWRLR12DA9F
PowerScan ALR Scanner, 8ft D9 Interface Cable 8320A326SCNRPWRXLR8DA9F
PowerScan ALR Scanner, 12ft D9 Interface Cable 8320A327SCNRPWRXLR12DA9F
5770 RF/Wireless Scanner Kit, ALR, D9 Interface Cable (see Note) 8410A326SCNRALRDA9
LS3408 Fuzzy Logic SR Scanner, 9ft D9 Interface Cable 8510A326SCNRFZYDA9F
LS3408 Extended Range Scanner, 9ft D9 Interface Cable 8520A326SCNRERDA9F
Note: 8410A326SCNRALRDA9 can only be used in conjunction with the MX6 Vehicle Cradle due to
base station power consumption.
When using the 8500 series tethered scanners (LS3408), the tethered scanner Power Mode must be set to
“Reduced Power Mode”. The default is “Continuous On”. Setting the scanner to Reduced Power Mode
will not impact performance of the 8500 series tethered scanners.
Revision History
Revision A, Initial Release, December 2003
Revision B, March 2005
Cover Page - Added 2005 LXE logo. Updated graphics in main guide.
Vehicle Mount Cradle - Added instruction for Tethered Scanners. Added instruction for securing
cradle power cable to vehicle or mounting bracket for cable strain relief. Fuse ampere values
corrected.
Manuals and Accessories - Added approved tethered scanners and cables to the Accessories
listing. Updated accessories listing, part numbers and pictures.
Revision C, June 2005
Vehicle Mount Cradle - Updated figures and instruction in section titled “Vehicle 12-48VDC
Direct Connection” (MX6A386PWRCBL6FT). Added figures and instruction for accessory in
section titled “Vehicle Cradle 24/72VDC Input Cable Connection” (9000A316PS24V72VMX6).
