Vehicle Mount Cradle 17
E-EQ-MX6DKRG-D-ARC MX6 Cradle Reference Guide
Vehicle Power Adapter Fuse Replacement
Caution:
In the case of a bad connection between the cigarette lighter adapter and the
vehicle’s cigarette lighter receptacle, the metal contacts on the connector
can become very hot. It may be possible to burn yourself.
12V Vehicle Cradle Power Supply, Cig Lighter Adapter.
MX6A382PSVEHMT12V
The cigarette lighter adapter uses a 2 Amp fuse that is user accessible and user replaceable.
Should it need replacement, replace with same size, rating and type of fuse.
1. Take the MX6 out of the vehicle cradle and disconnect the cigarette lighter adapter from
the vehicle cradle.
Note: If the cigarette lighter adapter is too hot, allow it to cool down before
continuing with the replacement instructions that follow.
2. Twist the button end of the cigarette lighter adapter to the right until the fuse is visible
and can be removed. Remove the fuse.
3. Discard the fuse and place a new fuse in the holder.
4. Reassemble the button end of the cigarette lighter adapter and twist to the left until finger
tight.
5. Reconnect the MX6 power cable to the vehicle cradle.
6. Reconnect the cigarette lighter adapter cable to the cigarette lighter receptacle.
7. Seat the MX6 firmly in the cradle.
