A SERVICE OF

logo

Repair Information 4-55
5055-01x
Face-Down Guide Assembly Removal
Paper Exit Motor & Full Sensor Removal
1. Open the top unit and remove the toner cartridges,
photoconductor drum units, and upper cover.
2. Remove the top cover.
3. Disconnect the connector and remove the five screws and two
snap bands from the face-down guide assembly. Remove the
assembly.
4. Remove the four screws from the face-down cover and the face-
down guide assembly, and remove the assembly.
Service.bk Page 55 Thursday, October 4, 2001 12:20 PM