KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Kramer K-Config Menus
Figure 175: Export Device xml
10.2 The Device Menu
Figure 17 illustrates the Device menu and 6 Table 1 defines it: 7
Figure 176: The Device Menu
Table 17: Device Menu Features
Menu Command Function
Connect…
Click to connect to a device via an IP number, a USB connector or
a serial port
(see
Figure 178)
Disconnect Click to disconnect the device
Write Configuration
Writes the configuration to the device
Read Configuration
Reads the configuration from the device
Load Firmware Load file for firmware upgrade.
Clear Device
Configuration
Removes the configuration from the device
10.2.1 Load Firmware
Warning: Before uploading a new firmware to a device, make certain that the firmware you have
selected matches the connected device. In some cases, it will be possible to upload firmware
that does not match a device, resulting in inoperability of the device.
Prior to firmware upgrade, disconnect the device from Site-CTRL and Web Access.
To load new firmware:
1. Check for the latest firmware at:
2. From the Device menu select Load Firmware.
The Load Firmware Upgrade window appears:
http://www.kramerelectronics.com/support/downloads.asp
1
Active only when a device is connected
