Page 9 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM
2) Press & Hold Set Button for 3 seconds - until you hear a beep
Mini Remote’s LED will blink green
3) Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
Mini Remote’s LED will blink red
4) Tap Set Button
Mini Remote’s LED will double-blink red
5) For each Responder you wish to remove from scene, Press & Hold its Set Button until Mini Remote
double-beeps
Mini Remote’s LED will continue to double-blink red
6) When all your devices have been removed, tap Mini Remote’s Set Button
Mini Remote will double-beep and its LED will turn off
Change Button / Scene Configuration (e.g., Change to 8 Button Mode)
1. Press & Hold Set Button for 3 seconds - until you hear a beep
LED will blink green
2. Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
LED will blink red
3. Press & Hold Set Button a 3
rd
time for 3 seconds - until you hear a beep
LED will blink green
4. Press & Hold Set Button a 4
th
time for 3 seconds - until you hear a beep
LED will blink red
5. Tap Set Button
LED will double-blink red
6. Press the appropriate button for the desired button/scene configuration
8 Button Non-Toggle (Always On)
Mini Remote will double-beep and its LED will turn off
7. To confirm the configuration, tap the top left button on Mini Remote several times
LED will flash as follows
8 scene Non-Toggle (Always On)
