FastPath Tasks: Optional
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-001
F-19
4. On the NonStop K-Series Server
4. On the NonStop K-Series Server
4a. Configure and Start an Expand-Over-IP Line-Handler
Process
1. Return to the TACL prompt at the NonStop K-series server.
2. Start COUP:
> COUP
3. Determine the name of a dummy controller that the Expand-over-IP line-handler
process can use. To list all the dummy controllers with product number 6999 on the
NonStop K-series server:
1) INFO CONTROLLER *, PRODUCT 6999
Example F-8 shows a COUP INFO CONTROLLER display.
The dummy controller must have two unit numbers available, one for writing and
one for reading data. List the unit numbers configured for a particular controller:
2) INFO DEVICE *, CONTROLLERNAME dummy_name
Example F-9 shows a COUP INFO DEVICE command. Configured unit numbers
appear in the UNITS field.
Choose two valid, unconfigured unit numbers. The first must be even, and the
second must be odd.
•
The 6999 dummy controller has unit numbers in the range 0 through 7.
•
The 6997 dummy controller has unit numbers in the range 0 through 255.
•
The 6998 dummy controller has unit numbers in the range 0 through 63.
Note. Dummy controllers can also have product numbers of 6997 or 6998.
Example F-8. COUP INFO CONTROLLER Display
NAME PRODUCT ADDRESS/CPU ADDRESS/CPU FLAGS
DUMMY0 6999 0-%300/01 0-%300/00
DUMMYC 6999 0-%300/04 0-%300/05
DUMMYD 6999 0-%330/03 0-%330/00
DUMMYE 6999 0-%300/06 0-%300/07
DUMMYF 6999 0-%310/07 0-%310/06
Example F-9. COUP INFO DEVICE Display
2) info device *, controllername dummye
NAME PRODUCT/MACRO CONTROLLERNAME UNITS FLAGS
$FXPRU NETCLUSTER DUMMYE 00,01 S
