ze1000 Series Troubleshooting and Self-Repair Guide Removing and Replacing Parts 33
Removing the Hard Disk Drive
Table 2. Hard Disk Drive Replacement Part Numbers
Description Part Number Exchange Part Number
Drive, hard disk (20 MB, 9.5 mm, IBM [diablo]
ATA100)
0950-4163 F1660-69114
Drive, hard disk (20 MB, 9.5 mm, Toshiba ATA100) 0950-4171 F3257-69102
Tray, hard disk drive F3410-60914
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter (if present), and remove the notebook’s battery.
2.
Remove both hard drive retaining screws from the bottom of the notebook.
Figure 8. Removing the Hard Disk Drive
3.
Carefully remove the hard drive from of the notebook.
4.
Remove all four screws from the tray and drive case, then remove the drive from the tray.
Screws,
M2.5×4mm
