A SERVICE OF

logo

Removal and Replacement Procedures
Maintenance and Service Guide 5–7
5. Remove the hard drive by following these steps:
a. Turn the notebook upside down with the rear panel
toward you.
b. Loosen the 4 PM2.5×4.0 screws 1 that secure the hard
drive cover to the notebook.
c. Lift the cover 2 straight up to remove it from the
notebook.
The hard drive cover is included in the Miscellaneous
Plastics Kit, spare part number 344852-001 for use with
HP zd7000 models, and spare part number 370805-001 for use
with HP Compaq nx9500 models.
Removing the Hard Drive Cover