A SERVICE OF

logo

Coalescence, grain.
Try reducing the amount of ink in your RIP software, then reprint the chart and check again.
Also consider the following tips.
You may have chosen a substrate preset that uses more ink than your substrate allows.
Consult the substrate vendor's Web site and HP's Web site for the latest substrate presets
and information.
Consult your RIP documentation to make sure you are applying the right substrate ICC profile.
Consult your RIP documentation on how to lower the total ink quantity of the preset.
2. Correct amount of ink: Each scale can be distinguished from the others, and there are no visible
defects.
3. Too little ink: The whole chart looks washed out.
Try increasing the amount of ink in your RIP software, then reprint the chart and check again.
NOTE: Backlit substrates normally require the use of the RIP's high ink limit option.
38 Chapter 4 Handle the substrate ENWW
Handle the substrate