Model 5328A
Installation
2-24. Other Packaging Methods
2-25. If factory packaging is not available, good commercial packing should be used. Contract
packaging companies in many cities can provide dependable custom packaging on short notice.
The following general instructions should be followed when repackaging with commercially
available materials.
a.
If shipping to a Hewlett-Packard Service Office or Service Center, attach a tag indi-
cating the type of service required, return address, model number, and full serial number.
b. Wrap the counter in heavy paper or plastic.
c.
Use a strong shipping container. A double-wall carton made of 350-pound test material
is normally adequate for shipments inside the U.S.
d. Use enough shock-absorbing material (3-to 4-inch layer) around all sides of the counter
to provide a firm cushion and prevent movement inside the container. Protect the con-
trol panel with cardboard.
e.
Seal the shipping container securely.
2-26. STORAGE
2-27. If the counter is to be stored for an extended period of time, it should be enclosed in a
clean, dry, sealed container. See specifications in Section I for storage environmental limitations.
2-3
