Figure 5-20 Color Settings dialog box
The Color Settings dialog box gives you independent control of the following settings:
●
Text, Graphics, and Photographs settings
Text, Graphics, and Photographs settings
Use these sections to adjust the Neutral Grays setting for each control.
Neutral Grays setting
The Neutral Grays drop-down menu controls the selection of a device-dependent color table that is
embedded in the MFP firmware. The options are Black Only or 4-Color. You can adjust the Neutral
Grays setting independently for Text, Graphics, or Photographs.
●
Black Only. This option generates neutral colors (grays and black) by using only black toner. This
option guarantees that neutral colors do not have a color cast. Black Only is the default setting for
the Text and Graphics components.
●
4-Color. This option generates neutral colors by combining all four colors of toner, which produces
smoother gradients and transitions to non-neutral colors. It also produces the darkest possible
black. The default setting for Photographs is 4-Color.
General
Use the General setting group to control the Edge Control, RGB Color, and Halftone settings for all
color printing.
ENWW Color tab features (HP PCL 6 Unidriver and PS Emulation Unidriver only) 243
HP PCL 6 and PS
emulation unidrivers for
Microsoft Windows
