A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 27
5.
Remove the DIMM.
To replace the component:
1.
Install the DIMM.
2.
Install the DIMM baffle.
3.
Install the access panel ("Access panel" on page 24).
4.
Install the server blade.
5.
Use RBSU to verify the configuration.
Mezzanine card
Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For
mezzanine card locations, see the system board components (on page 59).
To remove the component:
1.
Power down the server blade (on page 23).
2.
Remove the server blade (on page 23).
3.
Remove the access panel ("Access panel" on page 24).