A SERVICE OF

logo

14 Getting Started Guide
EN
Step 8. Attach Power Cord
1
Locate the power switch on the right
side of the printer. Make sure the
printer is switched off.
2
Connect the power cord to the
printer and a grounded power strip
or an AC outlet.
Note
Only use the power cord that came with
the printer.
3
Switch the printer on.
4
After the printer warms up, the
READY message should be visible on
the control panel display and the
Ready light will remain on. If the
READY message does not appear,
go to the problem solving chapter in
the printer user’s guide.
Ready
Data
Menu
Item
Go
READY