EN
Getting Started Guide 11
Step 6. Install Toner Cartridge
1 Remove the toner cartridge from its
packaging (save packaging for
possible cartridge storage). Open
the printer by lifting the top cover.
2 Rotate the cartridge and gently
shake it from side to side to
distribute the toner evenly inside the
cartridge.
3 Locate the sealing tape tab on the
end of the cartridge. Carefully bend
the tab back and forth until it
separates from the cartridge.
4 Firmly pull the tab straight out from
the cartridge to remove the entire
length of tape (22 in, or 56 cm).
Avoid touching any black toner on
the tape.
Note
If the tab separates from the tape,
grasp the tape and pull it out of the
cartridge.
5 Position the cartridge as shown with
the arrow pointing into the printer.
Slide the cartridge into the printer as
far as it will go.
If the cartridge is installed correctly, the
cover will close easily.
Note
If toner gets on your clothing, wipe it off
with a dry cloth and wash clothing in
cold water. (Hot water sets toner into
fabric.)
