zūmo 400/450 Owner’s Manual
aPPendix
Mount
To remove the zūmo from the mount,
ip up the lever on the mount. Lift out
the zūmo.
You can separate the suction cup from
the automotive mount. Turn the mount as
far as you can to the right or left. Apply
pressure in that direction until the mount
snaps off the arm.
NOTE: Reconnecting the
suction cup to the automotive
mount requires signicant force.
Press the ball end rmly into the
socket.
To remove the suction cup from the
windshield or mounting disk, ip the
suction lever up. Pull the tab on the
suction cup toward you.
pdating the zūmopdating the zūmo
Software
1. Go to www.garmin.com/products/
webupdater to download the
WebUpdater program to your
computer.
2. Connect the zūmo to your computer
using the mini-USB cable.
Mn-USB port for AC adapter, USB Mass
Storage mode, and updatng software
3. Run WebUpdater, and follow the
screen prompts. After conrming
that you want to perform an update,
WebUpdater automatically downloads
the update and installs it on your
zūmo.
