EPSON Stylus CX6400
10/03 EPSON Stylus CX6400 - 3
Envelopes Top (A): 0.12 inch (3.0 mm)
Left (B-L): 0.12 inch (3.0 mm)
Right (B-R): 0.12 inch (3.0 mm)
Bottom (C): 0.78 inch (20 mm)
Note:
Depending on the type of paper, the print quality may deteriorate in
the bottom area of the print, or this area may be smeared. Before
printing large jobs using an extended margin setting, print a single
sheet to confirm print quality.
Scanning
Scanner type Flatbed color image scanner
Photoelectric device Color CIS line sensor
Effective pixels 10,200 × 14,040 pixels at 1200 dpi,
100%
Document size Letter (8.5 × 11.0 inches) or A4
(8.5 × 11.7 inches); reading area is
selectable with software
Scanning resolution 1200 dpi (main), 2400 dpi (sub)
Output resolution 50 to 4800 dpi (adjustable in 1-dpi
increments); resolutions higher than
4800 are interpolated by software
Color separation RGB color filters on CCD
Image data 48 bits per pixel per color input
24 bits per pixel per color output
Gamma correction User defined 2 level
Light source RGB Three Color LCD
Reliability 30,000 cycles of carriage movements
(main unit MCBF)
Supported Memory Cards
Slot A Memory Stick
®
Memory Stick PRO
MagicGate Memory Stick
SD (Secure Digital) Card
MMC (MultiMediaCard)
Memory Stick Duo (adapter required)
miniSD Card (adapter required)
Slot B SmartMedia
™
(maximum 128MB;
standard 2000 compliant)
xD-Picture Card
Slot C CompactFlash
™
Type I and Type II
IBM
®
Microdrive
™
Memory Card Image File Requirements
File format JPEG or TIF format image files,
DOS FAT, taken with a DCF
version 1.0 compliant digital camera
(supports Exif Print v. 2.1 and 2.2)
Media format DCF (Design rule for Camera File
system) version 1.0 compliant*
Image size Vertical: 120 to 4600 pixels
Horizontal: 120 to 4600 pixels
Number of files Up to 999
* The DCF standard is set by the Japan Electronics and Information Technology
Industries Association (JEITA)
Note:
You can’t print images whose file names contain double-byte
characters.
Mechanical
Paper feed method Friction
Paper path Sheet feeder, top feed
Sheet feeder
capacity Approx. 125 sheets at 24 lb (90 g/m
2
)
Dimensions 17.7 × 16.9 × 8.6 inches (W × D × H)
450 × 429 × 218 mm (W × D × H)
Weight Approx. 19.2 lb (8.7 kg)
Electrical
Input voltage range* 108 to 132 V
Rated frequency
range 50 to 60 Hz
Rated current 0.5 A
Power consumption Approx. 23 W (ISO 10560 Letter
Pattern)
Approx. 6 W in sleep mode
Approx. 0.3 W in power-off mode
* Check the label on the back of this product for voltage information
Slot B
Slot A
Memory
card light
Slot C
