A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
478
Example usage:
To change the name and revision level of the MST configuration Identification:
DGS-3627:admin# config stp mst_config_id name R&D_BlockG revision_level 1
Commands: config stp mst_config_id name R&D_BlockG revision_level 1
Success.
DGS-3627:admin#
enable stp
Purpose Used to enable STP globally.
Syntax
enable stp
Description May be we could modify to allow user enable stp per instance. But CIST should be enabled
first before enable other instances. Current design is when user enable the CIST, all MSTIs
will be enabled automatically if FORCE_VERSION is set to MSTP(3) and there is at least one
vlan mapped to this instance.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable stp:
DGS-3627:admin# enable stp
Command: enable stp
Success.
DGS-3627:admin#
disable stp
Purpose Used to disable STP globally.
Syntax
disable stp
Description To disable STP functionality in every existed instance.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable stp:
DGS-3627:admin# disable stp
Command: disable stp
Success.
DGS-3627:admin#