xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
216
enable dhcp_server
Purpose Used to enable the DHCP function on the switch.
Syntax
enable dhcp_server
Description This command, along with the disable dhcp_server will enable and disable the DHCP server
function without affecting configurations.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable DHCP server:
DGS-3627:admin# enable dhcp_server
Command: enable dhcp_server
Success.
DGS-3627:admin#
disable dhcp_server
Purpose Used to disable the DHCP function on the switch.
Syntax
disable dhcp_server
Description This command, along with the enable dhcp_server will enable and disable the DHCP server
function without affecting configurations.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the DHCP server:
DGS-3627:admin# disable dhcp_server
Command: disable dhcp_server
Success.
show dhcp_server
Purpose Used to display the DHCP server settings.
Syntax
show dhcp_server
Description This command will display the DHCP server settings for its Global state, ping packet count
and ping timeout.
Parameters None.
Restrictions None.
