A SERVICE OF

logo

Index-3
failure
Disabling Password:
LCD
5-35
Disabling Password:
terminal
7-36
Disconnecting Support:
LCD
5-32
Disconnecting Support:
terminal
7-32
disk access delay time 9-20
Disk Array Parameters,
Advanced config.
9-25, 9-27
Drive I/O timeout B-3
Drive Identification B-2
Drive Motor Spin-up B-3
Drive side redundant
loop
B-5
drive status 6-6
drives, viewing and
editing
7-22
Drive-side Parameters,
Advanced config.
9-18
Dynamic enclosure on-
lining
B-9
E
Environment
management
B-7
Ethernet 3-1
Event Logs: terminal 6-10
event logs: viewing and
editing: LCD
4-6~7
event message 1-5
Expand Logical Drive 12-9
Expand Logical Volume 12-11
expansion in Windows
NT® Server
12-12
F
Fault Management 2-10
Fault Prevention 9-1
Fault-Tolerance 10-8
Fibre Channel
Parameters
2-10
Fibre Chip 8-4
Fibre Connection
Options
8-10
Filter Type: Include or
Exclude
8-18
flash memory C-1
flashing all SCSI drives 1-8
flashing selected SCSI
drives
1-8
Forcing Controller
Failover for Testing
10-34
format, low-level: LCD 5-40
format, low-level:
terminal
7-43
G
Gauge Range 6-1
global spare drive 1-6
global spare drive,
deleting
7-24
Global Spare: LCD 5-15
Global Spare: terminal 7-16
H
host application 2-2, 2-10
Host LUN Geometry B-3
Host-side and Drive-
side SCSI Parameters,
Advanced Config
9-11
Host-side Maximum
Queued I/O count
B-3
I
I/O timeout, SCSI 9-20
ID, explained 9-11
ID, SCSI, deleting 7-27
Identifying a Drive: LCD 5-24
Identifying Drive:
terminal
7-23
identifying drives 1-8, 5-24, 7-
23
idle drive failure
detection
9-23
Idle Drive Failure
Detection
9-23
Implementation to
S.M.A.R.T
9-6
In-band Fibre 8-5
In-band SCSI 9-14
Initial Screen: LCD 4-1
Initial Screen: terminal 6-1
JBOD 1-3