6-5
Using the Picture Recording Function
Using the Still Picture Recording Function with a Predetermined Schedule
Sample Still Picture Recording Settings
Settings specified on the “Camera Settings” page (→ P.3-11)
Specify the appropriate settings for the VB-C10R being used.
Settings specified on the “Preset Settings” page (→ P.3-15)
Set the camera angle focusing on the object to Preset 1.
Recording conditions to be set (→ P.3-17)
●Select “Record pictures according to a schedule”.
●Set still pictures to be recorded every 10 minutes.
●Set the camera position for recording to preset 1.
●Set “Camera Stabilization Time” to 5 seconds so that the camera can start recording pictures
after it has stabilized at its recording position.
Note
● The number of still pictures that can be recorded depends on size of the pictures.
Check the average file size per still picture in advance (→ P.3-17 and 3-22).
● Still pictures beyond VB-C10/VB-C10R’s capacity can be recorded if VBCollector
is used to automatically download still pictures recorded by the VB-C10/VB-C10R
(→ P.6-6).
