Improving Copied Image
5-8
Copying
5
1
Press [Menu].
2
Press [((-)] or [)(+)] to select <COPY SETTINGS> ➞ press [Set].
3
Press [((-)] or [)(+)] to select <COLOR BALANCE> ➞ press [Set].
4
Press [((-)] or [)(+)] to select the each color <BLACK>, <CYAN>,
<MAGENTA> and <YELLOW> ➞ press [Set].
5
Press [((-)] or [)(+)] or use the numeric keys to specify the toner
density ➞ press [Set].
You can specify the level from between 1 and 7. A value of 5 is the default setting. For
the toner density indication, 1 is the lightest and 7 is the darkest.
NOTE
Please refer to the table below when you adjust the color balance setting.
Adjustment on the monotone area have an instant effect on your imaging.
Adjusting the Saturation
You can adjust saturation to the appropriate level best suited for a document. Three
modes are available for adjusting the saturation level.
When the preview image
is yellow-looking.
Change the yellow to lower side, or change the
magenta and cyan to higher side.
When the preview image
is magenta-looking.
Change the magenta to lower side, or change the
yellow and cyan to higher side.
When the preview image
is cyan-looking.
Change the cyan to lower side, or change the yellow
and magenta to higher side.
When the preview image
is red-looking.
Change the yellow and magenta to lower side, or
change the cyan to higher side.
When the preview image
is green-looking.
Change the yellow and cyan to lower side, or change
the magenta to higher side.
When the preview image
is blue-looking.
Change the magenta and cyan to lower side, or
change the yellow to higher side.
