A SERVICE OF

logo

Open as PDF
next previous
Storing/Editing Irregular Paper Types
6-70
6
System Manager Settings
● If you want to change the paper type:
❑
Select from [Normal], [Tab Paper], [Pre-punched], or [Letterhead] ➞ press
[OK].
● If you want to change the paper's finishing type:
❑
Select the paper's finishing type ➞ press [OK].
● If you want to adjust the creep (displacement) correction:
❑
Press [▼] or [▲] to adjust the correction width ➞ press [OK].
You can set or change the correction width for each page and paper type
when the Booklet mode is set. The value you set here becomes the default
correction width when the selected paper type is used for saddle stitching
with automatic creep (displacement) correction.