Canon 5075 Manual

A SERVICE OF

next previous

Settings Menu

3-33

3

Printer Settings Menu

If [Auto] is selected, the gutter margins are automatically adjusted based on the

number of pages and paper thickness.

If [Correction Width] is selected, the gutter widths are adjusted based on a value

you enter which specifies the difference in how far the edge of the most inner

page and the edge of the most outer page come when sheets of paper are folded

in half to make the booklet.

NOTE



This function is not available if 'Booklet' is set to [Off].



Pressing [ ] increase the setting value by 0.001" (0.05 mm) each time the key is

pressed. Pressing [ ] decreases the setting value by 0.001" (0.05 mm) each

time. Holding down either [ ] or [ ] continuously speeds up the value

alteration.



If this setting is used in combination with the 'Offset Short Edge/Offset Long Edge'

or 'Margin', the values of these three settings are added together.