15
Using the Carrier
Harness Height Adjustment
1 Loosen harness completely.
2 From the rear of the carrier, unhook the
harness straps from the yoke (fig. A).
3 Lean head support pillow forward,
then pull straps through the shell and
cover.
•
It is not necessary to pull straps through
slots in the head support pillow.
4
Thread the harness straps through
slots cover and shell, at the new
height (fig. B).
5 Reattach harness straps to the
yoke (fig. C).
6 Pull harness adjuster strap to tighten
the harness.
7 Verify that all straps are threaded at the
same height and are not twisted.
14
Using the Carrier
Checking Harness Height
1 Place child in carrier, then secure
harness (see pages
12–13
).
2 Observe where the harness is
positioned on the child’s shoulders.
• Harness straps must be located at or
slightly below the child’s shoulders.
3 If harness height is correct, continue
using child carrier without adjustment.
If harness height requires adjustment,
refer to Harness Height Adjustment on
page 15.
