A SERVICE OF

logo

Open as PDF
next previous
Manual 2100-537
I
Page 28 of 54
2
3
4
5
7
6
1
8
MIS-2825
FIGURE 11
WATER CONNECTION COMPONENTS
The pressure requirements put on the pump are directly
affected by the diameter of pipe being used, as well as,
by the water ow rate through the pipe. The worksheet
included in Manual 2100-078 should guarantee that the
well pump has enough capacity. It should also ensure that
the piping is not undersized, which would create too much
pressure due to friction loss. High pressure losses due to
undersized pipe will reduce efciency and require larger
pumps and could also create water noise problems.
See descriptions for these reference numbers on Page 27.
NOTE:
Shown with Optional Top Kit for
Remote Condenser Applications