BenQ DC 3410 User’s Manual
21
A
PPENDIX
Warning/Error Messages and Codes
Note: If you cannot turn the digital camera off with power button, please press Shutter and
Set button at the same time to force off.
Message Cause Solution
Card Full There is insufficient card memory
capacity to store an image.
Delete the stored image(s) in
the memory card or insert a
new memory card. See
page 13
and page 4.
Nandgate Flash Full There is insufficient internal mem-
ory capacity to store an image.
Delete the stored image(s) in
the flash memory. See
page 13.
Card Lock The SD/MMC card is locked. Switch the card lock to the
unlock position.
Card Error The SD/MMC card is corrupted. Purchase a new SD/MMC card.
Nandgate Flash Error The memory is corrupted. Format the flash memory. See
page 15.
System Error
There is a general system error. Turn the camera off and on
and try again.
Format Error Formatting has failed. Turn the camera off and on
and try again (006), or pur
-
chase a new SD/MMC card
(004).
File Error The file is corrupted. Delete this image (page 13)
and take the picture again.
Image Locked The image can’t be deleted when
it is locked.
Unlock the protected image.
See
page 13.
Lens Cover Closed The lens cover is closed. Open the lens cover before
taking pictures.
Error Code Error Type
0000~0010 System Error
0000~0010 Storage Error
0200~0210 File Error
