© Adam Equipment Company 2010
31
This group of parameters are used to control the operation of the scale.
Parameter
Description Options Default
setting
S1 Un
Enable or disable weighing
units, will not allow to
disable all units, at least one
has to be enabled.
kg
g
lb
oz
lb:oz
kg
S2 bL
Backlight set to always on,
always off or automatic on
whenever a weight is placed
or a key is pressed
EL oFF
EL on
EL AU
EL AU
S3 AoF
Auto Off- Disable or set time
increment to turn off scale
SLP 0
SLP 1
SLP 5
SLP 10
SLP 0
S4 dt
Set Time and Date format
and settings
Enter the time manually
Enter the date manually
00:00:00
mm:dd:yy
S5 diS
Display all weights or only
when stable
ALL
StAb
ALL
S6 Fi
Filter setting to slow, normal
or fast
SLow
nor
FASt
nor
S7 SPS
Scale Password- If it is
anything other than 0000
then the user must enter the
password to gain access to
any of the scale parameter
settings. Must be entered
twice when asked. When
complete, it will display
“
donE
”.
PI _ _ _ _
0000
S8 CAL
Calibration
Calibrate the scale. See
Section 10.0
-
