A SERVICE OF

logo

Open as PDF
next previous
Chapter 3 49
Disassembling the Main Unit
Removing the Keyboard
1. Pull out and upward to expose the keyboard.
2. Disconnect the keyboard cable from the main board.
3. Remove the keyboard from the main board.
Removing the DIMM Module
1. Remove the two screws from the DIMM cover.
2. Remove the DIMM cover from the main unit.
3. Use two flat bladed screw drivers to push out the latches on both sides of the DIMM socket .
4. Remove the DIMM module from the main unit.
Removing the Modem Combo Board
1. Remove the screw from the modem heat sink and remove it from the main unit.
2. Use two flat bladed screw drivers to push out the latches on both sides of the modem socket.
340SG.book Page 49 Thursday, October 28, 1999 10:51 AM