22 Chapter 1
Power Management
Power Saving Mode Phenomenon
Standby Mode
Waiting time specified by the System
Standby value or the operating system
elapses without any system activity.
Or
When the computer is about to enter
Hibernation mode (e.g., during a battery-low
condition), but the Hibernation file is invalid
or not present.
The buzzer beeps
The Sleep indicator lights up
Hibernation Mode
When customized functions for power
management are set to
Hibernation
and the
corresponding action is taken.
All power shuts off
Display Standby Mode
Keyboard, built-in touchpad, and an external
PS/2 pointing device are idle for a specified
period.
The display shuts off
Hard Disk Standby Mode
Hard disk is idle within a specified period of
time.
Hard disk drive is in standby mode.
(spindle turned-off)
Environmental Requirements
Item Specification
Temperature
Operating +5 ~ +35 Degree C
Non-Operating -20 ~ + 60 Degree C
Humidity
Operating 20% ~ 80% RH, Non-condensing
Non-Operating 20% ~ 90% RH, Non-condensing
Vibration
Operating (Unpacked) 5 ~ 25.6 Hz, 0.38 mm (peak to peak)
25.6 ~ 250Hz, 0.5G
Non-Operating
Unpacked 5 ~ 27.1 Hz, 0.6G
27.1 ~ 50 Hz, 0.4 mm (peak to peak)
50 ~ 500 Hz, 2.0G
Packed 5 ~ 62.6 Hz, 0.51 mm (peak to peak)
62.6 ~ 500 Hz, 4 G
Mechanical Specification
Item Specification
Dimensions 289 mm (W) x 219 mm (D) x 23.5 mm (H)
Weight 41 lb (including battery)
I/O Ports 1 P/S2 Port, 1 Parallel Port, 1 Serial Port, 1 USB, 1 Modem Port, 1 LAN Port, 1
PCMCIA Slot, 1 VGA Port, 1 Microphone Port, 1 Line-in Port, 1 Line-out Port, 1
EasyLink
TM
Port, 1 DC-IN Port for AC adapter
Drive Bays None
340SG.book Page 22 Thursday, October 28, 1999 10:51 AM
