Fastening the lens cover
To avoid losing the lens cover, please fasten
the lens cover to the projector using the
enclosed strap.
1.
Fix the strap to the strap hole of the lens
cover.
Thread one end of the strap through the
strap hole of the lens cover and make the
loop at the end, and let the other end of the
strap through the loop. Not have a knot in
the strap at either end.
2.
Fix the strap to the strap hole of the projector.
Thread the other end of the strap through the strap hole of the projector and
make the loop there. Let the lens cover with the one end of strap though the
loop.
Replacing the lter cover for bottom-up use
For the projector installed bottom-up, please
replace the lter cover with the enclosed lter
cover for bottom-up use, to keep necessary
ventilation space.
Please refer to the “Air lter” (
59) for how to
detach and attach a lter cover.
WARNING ►Consult with your dealer before a special installation such as
suspending from a ceiling.
Strap hole
Strap hole
Filter cover
3-ii
Projector features / Preparations
