3Com RMON-EMP-3 Manual

A SERVICE OF

next previous

Configuring the Module 3 - 15

Table 3-4 describes the Serial Configuration Values menu options.

Table 3-4. Modify/View Serial Configuration Values

Menu Description

Option Result

1

Serial Port IP Address

Displays the serial IP address of the RMON

MultiProbe Module and enables you to enter a

new IP address.

2

Serial Port Subnet

Mask

Not used.

3

Serial Port Speed

Displays the serial port speed that sets the

baud rate used by the serial interface and

enables you to enter a new value. Valid values:

1 = 300

2 = 1200

3 = 2400

4 = 4800

5 = 9600

6 = 14400

7 = 19200

8 = 38400

4

Serial Port Mode

Display the serial connection value which

indicates whether or not the connection is

direct or is using a modem and enables you to

enter a new value. Valid values:

1 = direct

2 = modem

3 = direct with hardware flow control

4 = modem with hardware flow control