Filter
Top Products
Using the FIRE-15
13
ZOOM FIRE-15
4.
To store the patch, press the [STORE] key once more.
The store process is carried out, and the unit goes into program mode.
H
INT
By calling up an existing patch and then selecting another destination for the store process, copying a patch
is possible.
Using the built-in tuner
The FIRE-15 incorporates an auto-chromatic tuner which can be activated by pressing the
[TUNER] key.
1.
Press the [TUNER] key in the patch section.
The LED of the key lights up and the internal tuner becomes active.
If you want to tune while keeping the sound output on, press the [TUNER] key only briefly. (The
display indication shows "tU".) If you want to tune while the sound is muted, hold down the
[TUNER] key somewhat longer. (Release the key when the display indication shows "Mt".)
2.
Play the open string you want to tune
The left side of the display shows the note which is closest to the current pitch. The right side of
the display shows how far the pitch is off. Adjust the pitch while observing the display.
3.
To change the tuner reference pitch, press one of the [
Q
]/[
W
] keys.
The current reference pitch is shown for two seconds. The default setting is "40" (center A = 440
Hz).
T
MT
Hold down
Mute
A 8A8
The higher the rotation speed,
the more the pitch is off.
Pitch is sharp Correct pitch Pitch is flat