Filter
Top Products
Step 1: Charging the Transmitter
Mini-USB Connector
Charging LED
Removable
plastic jacket
On/Off (1/0) Switch
a Make sure that your computer is NOT set to go into sleep
mode after a period of inactivity. Check the computer's
documentation for instructions.
b Unless you have an iPod Mini, remove the plastic jacket
from the Transmitter.
c With your computer turned on, plug one end of the included
USB charging cable into the mini-USB connector on the
Transmitter, and plug the other end into an available USB
port.
It takes up to 2 hours for the Transmitter to become fully
charged. The LED nearest the bottom of the Transmitter is
red during charging and becomes dim when charging is
complete.
d When the the Transmitter is fully charged, unplug the
charging cable from the Transmitter and the PC.
A fully charged Transmitter works for about 6 hours.
e When you are not using the Transmitter, turn the 1/0
(On/Off) switch to 0 (Off) to save the battery.
4