Filter
Top Products
12
If this happens, the Headphones go into Idle mode, and
the Pairing LED flashes blue intermittently. If you come
back in range within three minutes, the Headphones
automatically become paired with the music player again.
If you were simultaneously paired with your mobile/cell
phone and your iPod/MP3 player, you may have to re-
initiate pairing with the cell phone.
If you don't come back within range within 3 minutes, the
Headphones go into Sleep mode. To restart pairing, turn
the Headphones off and then on again with the On/Off
button. Pairing should take place within 10 seconds.
Headphones
Pairing LED Status
Explanation
Red/blue alternate
flashing
Searching for a device or
pairing
Blue flashing Paired. After 10 seconds, the
LED turns off.
Intermittent blue
flashing
Idle (not paired), looking for
last-paired device. After three
minutes, Headphones go into
Sleep mode and LED turns off.
Intermittent red
flashing
Low battery
No indication Paired or in Sleep mode, or
headphones are turned off, or
battery is dead.
Using the Bluetooth Universal Transmitter
► The top two LEDs on the transmitter show you the mode
it’s in.