Zenith XBS344 Speaker System User Manual


 
6
Before Use (Continued)
Precautions
Handling the unit
When shipping the unit
For maximum protection, use the original carton and
packing materials when shipping or transporting the
unit. Re-pack the unit as it was originally packaged at
the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
To obtain a clear picture
The DVD/VCR Receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Notes on Discs
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
About Symbols
About the symbol display
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available at that moment or with that spe-
cific DVD.
About the disc symbols for instructions
Asection whose title has one of the following symbols are
applicable only to those discs represented by the symbol.
DVDs.
Audio CDs.
MP3 Discs.
JPEG Files.
JPEG
MP3
CD
DVD
Ye s N o
Selecting the Viewing Source
To view the DVD's output:
Press DVD on the remote or DVD/VCR on the front
panel until the DVD indicator in the display window
lights. Video from the DVD should now be viewed on
the TV screen.
To view the VCR's output:
Press VCR on the remote or DVD/VCR on the front
panel until the VCR indicator in the display window
lights. Video from the VCR should now be viewed on
the TV screen.
otes
If you insert a disc while the DVD/VCR Receiver is in
the VCR mode, the DVD/VCR Receiver will switch to
DVD mode automatically.
If you insert a cassette tape without an erasure pre-
vention tab intact while the DVD/VCR Receiver is in
the DVD mode, the DVD/VCR Receiver will switch to
VCR mode automatically.