Filter
Top Products
8
SUPERWOOFER SYSTEMYST-SW205
STANDBY/ B.A.S.S. HIGH CUT
40Hz
MOVIE
MUSIC
140Hz 100
VOLUME
ON
OUTPUT
+ – +–
+ – +–
INPUT
2
AUTO
PHASE
STANDBY
INPUT
1
TO SPEAKERS
/MONO
LOW
NORMREV
OFF HIGH
FROM AMPLIFIER
POWER
OFF
ON
VOLTAGE
SELECTOR
STANDBY/ B.A.S.S. HIGH CUT
40Hz
MOVIE
MUSIC
140Hz 100
VOLUME
ON
POWER
OFF
ON
VOLTAGE
SELECTOR
OUTPUT
+ – +–
+ – +–
INPUT
2
AUTO
PHASE
STANDBY
INPUT
1
TO SPEAKERS
/MONO
LOW
NORM
REV
OFF HIGH
FROM AMPLIFIER
~ Power indicator
Lights up in green while the subwoofer is turned on.
Ÿ STANDBY/ON button
Press this button to turn on the power. (The power
indicator lights up in green.)
Press again to set the subwoofer in the standby mode.
(The power indicator does not light.)
* This button can be used only when the POWER (%)
switch is set in the ON position.
Standby mode
The subwoofer is still using a small amount of power
in this mode.
! B.A.S.S. (Bass Action Selector System) button
When this button is pressed in to the MUSIC position,
the bass sound in audio software is well reproduced.
By pressing the button again so that it pops out at the
MOVIE position, the bass sound in video software is
well reproduced.
⁄ HIGH CUT control
Adjusts the high frequency cut off point.
Frequencies higher than the frequency selected by this
control are all cut off (and no output).
* One graduation of this control represents 10 Hz.
@ VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to
decrease the volume.
Rear panel
CONTROLS AND THEIR FUNCTIONS
Front panel
HIGH CUT
40Hz 140Hz
MOVIE MUSIC
*Illustration shows YST-SW205.