Filter
Top Products
LISTENING TO FM BROADCASTS
25 En
English
OTHER
FUNCTIONS
■ Manual station preset
Use this feature to preset your desired station manually.
1 Tune into a station.
See “Basic tuning operation” on page 23 for tuning
instructions.
2 Press MEMORY.
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
Press MEMORY again to cancel while the
MEMORY indicator is flashing.
3 Press A_E or A`E repeatedly to select a
preset group (A to E) while the MEMORY
indicator is flashing.
The selected preset group appears.
4 Press +/– to select a preset number (1 to 8)
while the MEMORY indicator is flashing.
5 Press MEMORY to confirm the preset.
After “A1:PRESET OK” appears in the front panel
display, the frequency appears with the preset group
you selected. The MEMORY indicator disappears
from the front panel display.
• Any stored station data existing under a preset number is
cleared when you store a new station under the same
preset number.
• Reception mode (stereo or monaural) is stored along with
the station frequency.
Flashes
Preset group
Flashes
Notes
Flashes
Preset number
The selected station has been stored as A1.