Filter
Top Products
65
English
ZONE 2 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
ADVANCED
OPERATION
Using this unit’s internal amplifier
To use this unit’s internal amplifier, set “ZONE2 AMP” to ON in SET MENU (see page 59).
The supplied remote control can be used to control Zone
2. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
■ To enable Zone 2 mode on the remote
control
1 Press .
2 Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
3 Enter the code number “2999”.
Immediately after you have configured the remote
control for Zone 2, the remote will enter main mode.
When the remote is in main mode, you can turn the
main unit on, or set it in standby mode independently
of Zone 2 by pressing SYSTEM POWER or
STANDBY.
■ To control Zone 2
1 Press to set the remote control to Zone 2.
The TRANSMIT indicator on the remote control
lights up while the remote control is in Zone 2 mode.
2 Press SYSTEM POWER to turn Zone 2 power
on.
3 Press an input selector button to select the
input source you want to listen to in the
second room.
R
L
+
–
PRESENCE/ ZONE 2
Second room
This unit
Remote controlling Zone 2
CD
MD/CD-R
TUNER
V-AUX
DVD
AMP
VCR 1 DVR/VCR2
DTV/CBL
MULTI CH IN
SLEEP
TRANSMIT
CODE SET
CD
MD/CD-R
TUNER
V-AUX
DVD
AMP
VCR 1 DVR/VCR2
DTV/CBL
MULTI CH IN
SLEEP
00_RXV650_U_EN.book Page 65 Tuesday, February 17, 2004 9:44 AM