Filter
Top Products
40
2
PLAYING AN AUDIO/VIDEO SOURCE WITH THE DIGITAL SOUND FIELD
PROCESSOR (DSP) EFFECT
1 Follow steps 1 to 7 shown in “BASIC OPERATIONS” on
pages 28 to 29.
2 Select the desired DSP program that is suitable for the
source. When using the remote control transmitter,
press AMP<TUNER> on the component selector first.
Front panel Remote control
or
The name of the selected program appears
on the display.
3 If desired, adjust the delay time and the output level of
each speaker. (See pages 42 and 43 for details.)
Notes
• You can select a program for each of the program sources.
Once you select a program, it is linked with the program
source selected at that time. So, when you select the
program source next time, the same program is automatically
called.
• If you prefer to cancel the DSP function, press EFFECT. The
sound will be that of normal 2-channel stereo without a
surround sound effect.
• When a monaural sound source is played with DOLBY PRO
LOGIC or DOLBY PRO LOGIC ENHANCED, no sound can
be heard from the main speakers and the rear speakers.
Sound is heard only from the center speaker. However, if the
NONE position is selected for “CNTR” in the SET MENU
mode, the main speakers output the sound of the center
channel.
2
05HTR-5140-e/f-4 6/22/99, 2:05 PM40