Filter
Top Products
12
REMOTE CONTROL TRANSMITTER
See “REMOTE CONTROL TRANSMITTER” on page 46 for full details.
1 Component selector
Press the button for the component you want to control with the
remote control transmitter. (The proper code must be set for
your component. See “SETUP CODES” on page 53.)
When the component selector has been pressed, the remote
control transmitter is set to operate that component.
2 POWER
When you have preset the code for a YAMAHA component, this
button switches between the power on and standby mode.
When you have preset the code for another manufacturer’s
component, this button turns on that component if it has a
remote control transmitter with a power button.
* It only functions when AMP<TUNER>, TAPE/MD, CD, DVD/LD or
DVD MENU on the component selector has been pressed.
3 TEST
Press this button to output the test tone for each speaker.
* It only functions when AMP<TUNER> on the component selector
has been pressed.
4 A/B/C/D/E, PRESET +/–
These buttons are used to select a preset station.
* They only function when AMP<TUNER> on the component selector
has been pressed.
5 MUTE
Press this button to mute the sound.
6 VOLUME
These buttons are used to adjust the volume.
: Turns up the volume.
: Turns down the volume.
7 SLEEP
This button is used to set the SLEEP timer.
8 PRG+, PRG–
These buttons are used to select a DSP program.
* They only function when AMP<TUNER> on the component selector
has been pressed.
9 Indicator
This flashes in red when a button on the remote control
transmitter is pressed. When it flashes rapidly several times,
press the selected button again.
0 Input selector (1 to 9)
1)
/Numeric buttons
2)
1) These buttons are used to select the program source to be
played.
* They only function when AMP<TUNER>, TAPE/MD, CD or
DVD/LD on the component selector has been pressed.
2) These buttons are used to select the menu or channel.
* They only function when DVD MENU, VCR, CBL/DBS or TV on
the component selector has been pressed.
05HTR-5140-e/f-1 6/22/99, 2:04 PM12