19
English
CD SYNCHRONIZED RECORDING
This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and
more precisely.
This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed near each other so that both can receive the signals from this unit’s remote control
transmitter.
21
SPACE TAPEPEAK
SYNCHRO
3
INDEX
PROGCLEAR
OPEN/
CLOSE
87 9 0
54 6 +I0
DIMMER TIME
REPEAT RANDOM
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
1 Load the disc.
2 Load a tape on the tape deck.
* The peak level search function of this unit is useful for
adjusting the recording level on the tape deck. (Refer
to page 18.)
OPEN/
CLOSE
3
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit flashes on and
off.
SYNCHRO
4 If necessary, select a desired track.
5
6 If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3 – 5 again.
To cancel this function
Press the STOP button.
Notes
• To finish or stop the recording, press the stop button on your
tape deck.
• A programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 13 – 14 for the programming procedure.)
• This function can also be used together with the automatic
tape-programming function. (Refer to page 15 – 17.)
5
SKIP
or
Both CD play and tape deck recording begin.
* CD play begins a little later than recording starts.
PLAY
3
4
4
5
1