Filter
Top Products
14
To stop program play
Press the STOP button. The first programmed track number will
be displayed.
To resume play, press the PLAY button. Play will begin from the
beginning of the program.
To check program data
1. Press the STOP button to stop the program play.
2. Press the PROG button.
3. Press the SKIP button. Each time you press this
button, the track number and the program number is
displayed in the order of the program. When you want to
check the preceding tracks, press the SKIP
button.
To correct program data
1. Follow the procedure described in “To check program
data.”
2. Display the track number to be corrected by pressing the
SKIP button.
3. Press a number button to select a track to replace the one
displayed. The previously programmed track will be cleared
from the memory and the new one will be programmed.
4. After the correction has been completed, press the PROG
button or the PLAY button.
To cancel a program sequence
There are three methods, as described below.
• Press the STOP button or the CLEAR button while the unit is
stopped.
• Open the disc tray.
• Switch off the power.
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number.
21
SPACE TAPEPEAK
SYNCHRO
3
INDEX
PROGCLEAR
OPEN/
CLOSE
87 9 0
54 6 +I0
DIMMER TIME
REPEAT RANDOM
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
2
1, 3
1 Select a track which has index numbers.
5
2
INDEX
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
INDEX
6
3 Select the desired index number.
To cancel the index search function
Press the INDEX button.
Notes
• Not all discs have index numbers. The index system is a
method for sub-dividing tracks into smaller divisions (for
example, the movements within classical symphonies) for
easier location of those parts. The liner notes with the disc
usually tell if such index numbers are included.
• If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
• For some discs, play may begin slightly prior to the actual
designated index point.
• If the disc has no encoded index points, play will begin from
the start of the selected track.
• The index number can be designated only while the INDEX
number display is illuminated.